Description
Features
Low profile extruded aluminum track with 20Amp rated flat solid integral conductors
Variety of connectors and accessory parts available
Note Nora Track is not approved for use with remote transformers Low voltage fixtures require a transformer for each fixture can be purchased as a separate item or a fixture with transformer included
Specification
Extrusion 0030 die cast aluminum construction with 0045 PVC insulators holding 12gauge flat conductor wiring Polarity groove is located on face of track to indicate location of grounding conductor
Polarity Groove Each track section includes a groove on the surface of the extrusion This groove must be continous throughout the track run Track heads also have a polarity groove which must coincide with the tracks polarity groove
Mounting The track may be surface stem or cable mounted All lengths of track can be field cut Surface mounting hardware included with each track section
Compatibility Nora track system is compatible with Halo Catalina Hampton Bay HaloEdison or any other brand configured to Halo 3wire track configuration Note Wands and monopoint canopies are generally not compatible with other manufacturers
Electrical
Input Voltage 120V
Wattage 2400W each circuit
Dimming Nora track may be dimmed with any approved incandescent magnetic low voltage or electronic low voltage controls depending on the track fixtures being used If using two dimming switches on NT2300 twocircuit track only apply a single phase neutral to the shared common wire on the track rail Do not attempt to use 3way or multiphase neutral if dimming
Listing
cULus Listed for Dry Locations
For more information Click Here PDF
For installation instructions Click Here PDF
Please contact us for any additional options seen on specification sheet
Reviews
There are no reviews yet.