Description
PICTURE MAY NOT REPRESENT ACTUAL ITEM FINISH PLEASE REFER TO PRODUCT DESCRIPTION
Construction
One piece diecast low copper <06 Cu Aluminum Alloy 360 with vents and 100 minimum wall thickness
Finish fade and abrasion resistant electrostatically applied thermally cured triglycidal isocyanurate TGIC polyester powdercoat
Lens is impact resistant 1/8 tempered glass with antireflective coating
Lens has a onepiece extruded vulcanized silicone gasket
Lens frame one piece diecast low copper <06 Cu Aluminum Alloy 360 and 100 minimum wall thickness
Lens frame has a onepiece Oring extruded vulcanized silicone gasket
Midframe one piece diecast low copper <06 Cu Aluminum Alloy 360 and 100 minimum wall thickness
Midframe secures to lens frame and housing by stainless steel recessed Allenhead screws
Silicone gaskets throughout
All external fasteners are stainless steel
Optics
LEDs mount to a metal printed circuit board assembly MCPCB
Optical lenses are clear injection molded PMMA acrylic
Installation
Fixtures must be grounded in accordance with national state and/or local electrical codes
Electrical
Universal voltage 120 through 277V with a / 10 tolerance
Driver is Underwriters Laboratories recognized
Drivers shall have greater than a 09 power factor less than 20 harmonic distortion and be suitable for operation in 40C to 40C ambient environments
Luminaire shall be capable of operating at 100 brightness in a 40C environment
Both driver and optical array have integral thermal protection that will dim the luminaire upon detection of temperatures in excess of 85C
Dimming range from 10 to 100 through the use of standard 010V interface on the programmable driver
Modular wiring harness in the service area provides user access to the dimming circuitry
For more information Click Here PDF
Please contact us for any additional options seen on specification sheet
Reviews
There are no reviews yet.